4 Channel PoE Injector |
|
 |
4 Channel Power over Ethernet injector
POE-4HP is a low cost
4-Port High Power midspan injector. It is
functionally compliant to the IEEE802.3af
standards. This midspan injector can
fully provide 36W per port over Cat5e/
Cat6 cables into 10/100/1000 Base
T systems, eliminating the need for
power management and prioritization.
APPLICATIONS |
| IP Telephones; Wireless Network Access Points |
Blue Tooth Access Point; Security Cameras |
FEATURES |
| Fully Compliant with IEEE802.3af |
10/100/1000 base T compatible; Full ProtectionOCP, OVP |
| Full Power of 125W - (36 W per port) |
Cisco AP1250 Full Power Support; rack mount possible |
| Cisco: no extern parts required for Legacy devices: |
VoIP Phones (7910, 7912, 7940, 7960)
Access points (350, 1100, 1200) |
SAFETY |
| Isolation Test |
Primary to Secondary: 4242VDC for 1min. 10mA, Primary to F.G.: 2121VDC for 1 minute, Output to F.G.: 2121VDC for 1 minute |
| Insulation Resistance |
Primary to secondary: >10M OHM 500 VDC, Primary to F.G.: >10M OHM 500 VDC |
OUTPUT |
| DC Output |
56V @ 36W per port |
| Regulation |
Functional requirements of IEEE802.3af |
INPUT |
| AC Input Voltage Range |
90 to 264 VAC |
| Leakage Current |
3.5 mA max @ 254 VAC 60 Hz |
| AC Input Frequency |
47-63 Hz |
| AC Inrush Current |
30A(RMS) max. for 115VAC/ 60A(RMS) max. for 230VAC |
| AC Input Current |
2.5A for 90VAC / 1.3A for 240VAC |
GENERAL |
| Effi ciency |
75% (typical) at max. load and 120VAC 60Hz |
| Hold-up Time |
16mS min. 120VAC and max. load |
| Transient O/P Voltage Protection |
60V max. at switch on and off at any AC line Phase |
| Turn-On Delay Time |
3 sec max. at max. load, and 120VAC 60Hz, 25Hz |
| USB Diagnostics Port |
USB “B” port for diagnostics & manual port control Windows GUI |
| Regulation |
Functional requirements of IEEE802.3af |
EMC |
| Conducted & radiated Emission |
EN55022 Class A, FCC Class A with UTP Cabling
EN55022 Class B, FCC Class B with FTP Cabling |
| Immunity EN50082-1 |
ESD EN61000-4-2. Level 3
RS EN61000-4-3. Level 2
EFT EN61000-4-4. Level 2
Surge EN61000-4-5. Level 3
CS EN61000-4-6. Level 2
Voltage Dips EN61000-4-11
Harmonic EN61000-3-2 Class A |
ENVIRONMENTAL |
| Temperature |
Operation 0 to +40°C,
Non-operation -25 to +65°C |
| Humidity |
Operation 5 to 90% |
Please choose your model via drop down menu on top!
|
|
|
LUPUSCAM 
LUPUSNET 
Devenez partenaire!