Back to overview
LUPUSEC - Outdoor siren V2
LUPUSEC - Outdoor siren V2
LUPUSEC - Outdoor siren V2
LUPUSEC - Outdoor siren V2
Item No.:12033
EAN:4260195432925

LUPUSEC - Outdoor siren V2

199,00 EUR
INCL. VAT
On stock
Optionales 9V Netzteil:
Description

LUPUSEC - Outdoor siren V2


Alarmsystem
The new outdoor siren!
The new wireless outdoor siren V2
The wireless LUPUSEC-XT outdoor siren V2 should be a part of every alarm panel! The volume of 107 dbmakes sure that in case of an alarm your neighbourhood becomes attentive of any intruders. Thus, through a striking audible and visible alarm your property is secured in an emergency. The sophisticated and weather resistant design of the V2 chassis combines the necessary noticeability with a modern appearance. Hence, the outdoor siren V2 suits any home, no matter if it is old or new. The outdoor siren V2 is battery powered and connects wirelessly to your XT alarm panel. You do not need to hassle with any wiring and you can install it at any wall or ceiling of your choice. Additionally, you can use a 9V mains adapter. Simply install the outdoor siren V2 and connect it wirelessly with the alarm panel - it's as simple as that!


lupusec smart home
Easy configuration
Easy configuration via your browser:
You can configurate your outdoor siren V2 via the webinterface of your XT2. You can control the volume and the flash depending on the status of the XT2 in the menu Sensors -> Devices -> Advanced Settings.


Alarmanlage XT2 Smarthome - Produktuniversum
The LUPUSEC alarm system:
The LUPUSEC alarm system:
We offer a wide variety of sensors and accessories that you can control and programm in your smart home alarm system. You can integrate door contacts, IP cameras, motion detectors, mechanical and magnetic locks, shutter relays, and heating controls with just a view easy clicks to your smart home alarm panel.

Tech. Data

LUPUSEC - Outdoor siren V2

Technical data:

Dimensions 205 x 83.5 x 316.8mm (8.07 x 3.28 x 12.47 inch) (LxWxH)
Weight 1.34 kg (2.95 pounds) (including batteries)
Volume 107 dB @ 1 m (1.09 yards)
Volume adjustment 4 Level: loud, medium, quiet, mute
Lighting Yes, red
Tampering protection Yes
Tampering protection displayed in the web interface Yes
Status displayed Yes
Status checked by the alarm panel Yes
Status displayed in the alarm panel Yes
Radio frequency 868,6625 MHz
Radio performance max. 10mW(10dBm)
Transmission range Approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Modulation FM
Mounting options Screwing
Power supply 4 x 1.5V D alkaline batteries or with 9V 1A DC mains adapter
Average battery life Approx. 3 years (Depends upon the configuration and usage)
Place of installation Wall, ceilling
Conforms to the following standards CE, FCC, RoHs, EN50131-4 / EN50131-5-3 Grade II, Class IV
Protection class IP56
Working environment -10°C to 45°C (14F to 113F)
Optional mains adapter 9V 1A DC
Compatible with XT alarm panel XT1 (please note FAQ), XT1 Plus, XT2, XT2 Plus, XT3, XT4

Includes:

Outdoor siren V2 4 x 1.5V D alkaline batteries
Screws and dowels Manual
Videos

Downloads
Designation
Type
Size
Date
Description
 
Datenblatt - LUPUSEC Außensirene V2
PDF
361 KB
2.6.2023
Datenblatt - LUPUSEC Außensirene V2
Konformitätserklärung - Außensirene V2
PDF
247 KB
8.5.2023
Konformitätserklärung - Außensirene V2
FAQ
Frequently Asked Questions

How can I deactivate the signals of the siren?

Open the menu "Alarm system" → "Siren settings" → "Sirens".

Click on:

  • "Confirmation signal off"
  • Click on "Apply now"
  • You will hear a confirmation tone of the siren that signifies, that the change was saved

Click on

  • "Input off"
  • Click on "Apply now"
  • You will hear a confirmation tone of the siren that signifies, that the change was saved

The siren will always sound warning signals (e.g. five signaltones upon arm or disarm signifies an open tampering contact of the siren) independently of these settings.

last updated - 05/27/2019

Outdoor and indoor siren do not sound an alarm

Please check if the alarm for the external sirens is enables in the menu "Alarm system" → "Siren settings" → "Alarm settings".

last updated - 05/27/2019

Outdoor siren V2 - Which settings can be changed with the XT1 Plus, XT2 (Plus), XT3 and XT4?

There are three available settings:

  • You can deactivate the tampering protection for one hour (e.g. to install the siren or change the batteries).
  • You can activate or deactivate the confirmation tones for arming or disarming.
  • You can activate or deactivate the confirmation tones and signals during the entry and exit delay.

Additionally, the XT2 (Plus) offers you the following advanced settings.

  • You can set the alarm volume.
  • You can define if the outdoor siren shall signal a doorbell signal.
  • You can set if the outdoor siren shall sound an alarm in home mode.
  • You can set if the outdoor siren shall sound an alarm in arm mode.
  • You can activate or deactivate the siren strobe.
  • You can activate or deactivate the confirmation strobe
  • You can activate or deactivate the exit strobe.
  • You can activate or deactivate the entry strobe.
  • You can activate or deactivate the trigger strobe.
  • You can set the volume of the exit delay.
  • You can set the volume of the entry delay.

For more information concerning the available settings, please refer to the latest online manual of the XT2 (Plus).

last updated - 12/03/2021

Outdoor siren V2 - Which settings can be changed with the XT1?

There are three available settings:

  • You can deactivate the tampering protection for one hour (e.g. to install the siren or change the batteries).
  • You can activate or deavtivate the confirmation tones for arming or disarming.
  • You can activate or deavtivate the confirmation tones during the entry and exit delay. Depending on the version of your siren, this will also activate or deactivate the flash during the entry and exit delay.
    • For more information regarding the version of your siren, pleaes refer to the FAQ "Outdoorsiren V2 and XT1 - How can I set up my outdoor siren V2?"
last updated - 03/22/2017

Outdoorsiren V2 and XT1 - How can I set up my outdoor siren V2?

XT1 siren settings

The following table displays how you can set up your outdoor siren V2 with the XT1 alarm panel. Please note the different versions of the outdoor siren.

Please use the menu "Sensors" → "Devices" for these settings.

SettingsFor sirens since M0216 (8L05 on the chip)For sirens before M0216 (8L04 on the chip)Sirens since 8L07
Confirmation tone on / Entry onLast sound upon arming on
Last LED flash on
Sound and flash during the delay time on
Last sound upon arming on
Last LED flash on
Sound and flash during the delay time on
Last sound upon arming on
Last LED flash on
Sound and flash during the delay time on
Confirmation tone off / Entry onLast sound upon arming off
Last LED flash off
Sound and flash during the delay time on
Last sound upon arming off
Last LED flash on
Sound and flash during the delay time on
Last sound upon arming off
Last sound upon arming on
Sound and flash during the delay time on
Confirmation tone off / Entry offLast sound upon arming off
Last LED flash off
Sound and flash during the delay time off
Last sound upon arming off
Last LED flash on
Sound and flash during the delay time off
Last sound upon arming off
Last LED flash on
Sound during the delay time off and flash during the delay time on
Confirmation tone on / Entry offLast sound upon arming on
Last LED flash on
Sound and flash during the delay time off
Last sound upon arming on
Last LED flash on
Sound and flash during the delay time off
Last sound upon arming on
Last LED flash on
Sound during the delay time off and flash during the delay time on
last updated - 07/13/2020

Why does the alarm panel still display low battery after I have changed the batteries of a sensor?

When you change the batteries, we advice to discharge any residual voltage. Press the learn button of the sensor a few times before instering the new batteries.

last updated - 03/22/2017

Show all FAQ's
Reviews
There are currently no product reviews.

We Also Recommend :

  • The new LE 232 PoE is more than just a video surveillance camera. It is your personal site security.
  • Recognise trespassers on your property, address them, and trigger an alarm.
  • The intelligent motion detection recognises human beings
  • 4MP wide-angle lens
  • 40m IR night-vision range
  • 30m floodlight range
  • Three customisable escalation levels: Audio message, floodlights, siren.

Are you looking for something specific?

  • Frequent search terms
  • Specialist retailers
  • Products
  • Contact