Retour à l`aperçu
LUPUSEC - Outdoor Keypad V2
LUPUSEC - Outdoor Keypad V2
LUPUSEC - Outdoor Keypad V2
LUPUSEC - Outdoor Keypad V2
LUPUSEC - Outdoor Keypad V2
LUPUSEC - Outdoor Keypad V2
Item No.:12109

LUPUSEC - Outdoor Keypad V2

349,00 EUR
En stock

LUPUSEC - Outdoor keypad V2

Das neue Outdoor Keypad von LUPUS
Weather-proof outdoor keypad!
The keypad grants you an extensive control of your smart home alarm panel

The LUPUSEC outdoor keypad is primarily used to control, arm, and disarm your XT2 (Plus) smart home alarm panel. You simply need to enter one of fifty freely selectable PIN codes or to swipe with your personal RFID tag over the keypad.

In comparison to the regular keypad, the main advantage of the outdoor keypad is that you do not need to enter the secured area in order to disarm the alarm panel. Thus, there is no more need to use delay times in high-risk areas.

You do not need to hassle with any wiring. The outdoor keypad runs or batteries or the included 12V mains adapter.

lupusec smart home funktionen
Extensive functionality
Enhanced home automation functions:

The outdoor keypad features four freely programmable smart home buttons (F1 – F4) that allow you, for example, to switch your lights on or off, adjust the heating when you leave, activate the door buzzer, and even trigger complete scenarios. At a touch, the integrated alarm output can be used to e.g. start camera recordings or open your door.

Depending on the PIN code you use, the keypad allows you to control both areas. You define the user rights of the PIN code and of the corresponding RFID tag in the web interface of the alarm panel. Up to 50 Pin Codes per area (up to 6 with the XT1) can be created and assigned an individual name. Hence, in the logs, you can always check who used the keypad and our free APP informs you via push notifications about any change of the alarm panel.

LUPUSEC XT2 Smarthome Alarmanlage
The LUPUSEC alarm system
Broad expandability - The LUPUSEC alarm system:
We offer a wide variety of sensors and accessories that you can control and program in your smart home alarm system. You can integrate door contacts, IP cameras, motion detectors, mechanical and magnetic locks, shutter relays, and heating controls with just a view easy clicks to your smart home alarm panel.


LUPUSEC - Outdoor Keypad V2

Technical data:

Dimensions 129.7 x 195 x 22mm (5.1 x 7.67 x 0.86 inch) (HxWxD)
Weight 0.350 kg (0.77 pounds)
Access options 4-digit PIN code, RFID tag (2 included)
Illumination Yes, blue
Tampering protection Yes
Tampering protection displayed in the alarm panel Yes
Status display Yes
Status checked by the alarm panel Yes
Status displayed in the alarm panel Yes
Battery status displayed in the alarm panel Yes
Battery status checked by the alarm panel Yes, automatically
Radio frequency 868,6625 MHz
Radio performance max. 10mW(10dBm)
Transmission range Approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Modulation FM
Mounting options Screwing
Power supply 2 x AA alkaline batteries 1.5V
Average battery life 2 years
Maximum amount of connectable RFID tags 100 (50 PIN Codes)
Detection range of the RFID tags 0 - 6cm (0 - 2.3 inch)
RFID protocol and frequency ISO 15693, 13.56MHz,
Functions Toggle arm-, disarm-, and home mode; trigger a silent-, fire-, or medical- alarm; check alarm panel status; alarm signalisation
Home automation buttons 4 (F1 to F4)
Alarm output 1 (100mΩ, max. 2A 30VDC / 0.5A 125VAC, handles max. 250VAC/220VDC @ 2A / 60W)
Place of installation Wall
Conforms to the following standards CE, FCC, RoHs
Protection class IP 66
Encryption Rolling Code
Compatible with XT alarm panel XT1 Plus, XT2 and XT2 Plus (Rolling Code Firmware), XT3, XT4


Outdoor Keypad 2 x AA batteries
Screws and dowels Manual
Wall mount 12V mains adapter
Datenblatt - LUPUSEC Outdoor Keypad V2
209 KB
Datenblatt - LUPUSEC Outdoor Keypad V2
Konformitätserklärung - Outdoor Keypad V2
241 KB
Konformitätserklärung - Outdoor Keypad V2
Questions fréquemment posées

Why can't I add my new V2 control units to my alarm panel?

In order to be able to install the new V2 control units, you need to install the latest firmware (at least version and the sensor firmware 35E that is included in the firmware file.

last updated - 27/05/2019

Show all FAQ's
Il n'y a aucun commentaire pour ce produit.

Vous avez un besoin particulier ?

  • Recherches fréquentes
  • Revendeurs
  • Produits
  • Contact