The LUPUS PIR motion detector Pro is triggered by any change in the temperature field. Hence, it alarms you if anyone moves in its field of vision. Simply install the motion detector at the location you want to secure.
If installed correctly, in a height of about 1.8 – 2 meters (5.9 – 6.5 feet), the motion detector registers any movement of persons in a range of up to 12 meters (13 yards). The angle of vision of this motion detector is 110°. Please do not aim the motion detector on sources of heat, such as, radiators or windows. If you need to secure such locations, please use our dual way motion detector (Item No. 12034).
Like our other alarm sensors, the PIR motion detector is battery powered, features a tampering protection at its back, and is connected wirelessly to your alarm panel. Thus, you can simply screw or glue it against any wall or ceiling of your choice. A corner mount bracket and mounting material is included. Since the PIR motion detector is wireless, you do not need to hassle with any wiring: Simply install the motion detector and connect it wirelessly with the alarm panel – it’s as simple as that!
Once connected to your XT alarm panel, the PIR motion detector sends every status change to the alarm panel. This includes a notification in case of low battery, if the tampering protection at the back of the sensor is triggered, and when a motion is detected.
Thus, you can create various home automation rules. Do you want to automatically switch on the light when you enter your bath at night? No problem – the intuitive web interface allows you to quickly create such a rule.
Technical data: |
|
Horizontal detection angle | 110° |
Dimensions | 45 x 62 x 94mm (DxWxH) 1.77 x 2.44 x 3.7 inches (DxWxH) |
Weight | 0.08 kg 0.17 lbs |
Detection method | Thermal field measurement up to 12m (13 yards) |
Sensor type | PIR Passive Infrared |
Tampering protection | Yes |
Tampering protection of the sensors displayed in the web interface | Yes |
Status checked by the alarm panel | Yes |
Status displayed in the alarm panel | Yes |
Battery status displayed in the alarm panel | Yes |
Battery status checked in the alarm panel | Yes, automatically |
Radio frequency | 868,6375 MHz |
Radio performance | Max. 10mW(10dBm) |
Transmission range | Max. 2km outdoors without obstacles, inside buildings between 30-300 metres. |
Modulation | FM |
Mounting options | Screwing or gluing in 1.8 - 2m (1.9 - 2.1 yards) height |
Power supply | 3V Lithium battery (CR123) |
Average battery life | Approx. 4 years (at 20 motions a day) |
Place of installation | Walls, corners, etc. Only indoors |
Conforms to the following standards | CE, FCC, RoHs |
Certified according to | EN 50131 - 2 |
Working environment | -10°C to 45°C /td> |
Air humidity | Max. 85% |
Compatible with XT alarm panel | XT4 |
Includes: |
|
PIR Motion detector V2 | Battery |
Screws and dowels | Corner mount |
Manual |
|
|