Retour à l`aperçu
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
LUPUS - Shutter Relais V2
Item No.:12128
EAN:4260195434370

LUPUS - Shutter Relais V2

99,00 EUR
TVA INCLUS
En stock
Description

LUPUS - shutter relay V2


Rollläden von ueberall steuern
Smart control for your shutters!!
Connect your shutters to your Smarthome alarm panel
The LUPUSEC shutter relay allows you to control your shutters, jalousies, and awnings via your alarm panel. You can control the relay manually via smartphone, tablet, computer, and existing switches, or, automatically, when you enter or leave your home, time, brightness, or temperature controlled.
The intuitive app and webUI of the alarm panel allows you to create groups or open and close your shutters completely or to a certain percent.
lupusec smart home funktionen
Easy to install
Intuitive user interface
The shutter relay is installed behind or next to your existing shutter switch. By connecting the shutter relay with your shutter switch, you can continue to control your shutters as you are used to. Additionally, you can define home automation rules that will automatically open or close your shutters.
LUPUSEC XT2 Smarthome Alarmanlage
The LUPUS alarm system
Broad expandability - The LUPUS alarm system:
We offer a wide variety of sensors and accessories that you can control and program in your smart home alarm system. You can integrate door contacts, IP cameras, motion detectors, mechanical and magnetic locks, shutter relays, and heating controls with just a few easy clicks to your smart home alarm panel.
Feuille

LUPUS - Shutter Relais V2

Technical data:

Dimensions approx. 51 x 49 x 22 mm (WxHxD)
approx. 2 x 0.86 x 1.92 inches (WxHxD)
Weight approx. 0.04 kg
approx. 0.08 lbs
Status indicator Yes, red LED
Status checked by the alarm panel Yes
Radio frequency 2.4Ghz ZigBee HA 1.2
Radio performance max. 100mW(20dBm)
Transmission range approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Modulation FM (SRD Category 2)
Possible load 1/4 hp; 3A (New Version since mid 2021, before 1.8A)for motors with compensated efficiency factor (inductive loads)
Input 110V - 230V AC, 50/60 Hz
Conforms to the following standards CE, FCC, RoHs
Working environment -10°C to 45°C
14F to 113F
max. 85% humidity (non condensing)
Compatible with XT alarm panel XT1 Plus, XT2 Plus, XT3, XT4

Includes:

Shutter relay V2 4 Wago clamps
Manual  
Téléchargements
Designation
Type
Size
Date
Description
 
Datenblatt - LUPUS Rollladenrelais V2
PDF
323 KB
2.6.2023
Datenblatt - LUPUS Rollladenrelais V2
Konformitätserklärung - Rollladenrelais V2
PDF
246 KB
8.8.2022
Konformitätserklärung - Rollladenrelais V2
LUPUS - Instruction de service en allemande
PDF
14.4 MB
15.2.2024
XT Instruction de service en Allemande version 1.17
Firmware - LUPUS Rollladenrelais
ZIP
282 KB
23.5.2023
Update auf Sensorensoftware OTA 3.20 (Voraussetzung OTA-Version) -> Rotierungsfunktion Raffstores, Anlernsignal per Tasteranschlüsse, Funktionale Verbesserungen
FAQ
Questions fréquemment posées

How to calculate the inrush current of the shutter motor?

Please be aware of the inrush current of the motor of your shutter when using our shutter relay. The inrush current is mostly not found in the technical data of your motor, but can be calculated in the following way.

Nominal current = Power / 230V
Maximum current = Nominal current x 1,414
Inrush current = Maximum current x 2

A shutter motor with a power of 120W, the calculation would look the following:

Nominal current: 120 W / 230V = 0,52A
Maximum current: 0,52A * 1,414 = 0,74A
Inrush current: 2x 0,74A = 1,48A

A shutter motor with a power of 120W / 0.52A has an inrush current of 1.48A for the first 20-30ms.

Please make sure, that the inrush current of your motor is lower than the maximal load of our shutter relay. Otherwise, the shutter relay can be damaged. If the inrush current of your shutter is higher, please use a suitable cut-off relay between the shutter relay and the motor.

last updated - 29/06/2020

Show all FAQ's
Commentaires
Il n'y a aucun commentaire pour ce produit.

We Also Recommend :

  • Optimal für die flächenbündige Wandmontage
  • Display schaltet sich nur bei Annäherung ein.
  • Android 12 mit starkem Rockchip 3588 ARM-CPU
  • Stromversorgung über das Netzerkkabel (PoE)
  • Kontraststarkes Display mit 1280x800 Pixeln Auflösung
  • LUPUS APP vorinstalliert, Fremdanwendungen über den Playstore ausführbar.

Vous avez un besoin particulier ?

  • Recherches fréquentes
  • Revendeurs
  • Produits
  • Contact