Retour à l`aperçu
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
LUPUSEC - Door contact V2 (blanc)
Item No.:12113

LUPUSEC - Door contact V2 (blanc)

69,00 EUR
En stock

LUPUSEC - Door contact

Türkontakt in weiß
LUPUSEC Door contact
Wireless door contact for your LUPUSEC smart home alarm panel

The LUPUSEC - door contact is an integral part of your alarm system and is used to secure your doors and windows.

The contact consists of two parts: one is fixed at your door or window frame, the other one is fixed at the wing of the door or window sash. Thus, the contact recognises if the door or window is opened or closed. If you install the door contact at the bottom of your window, it is still possible to tilt your window.

You can integrate as many door and window contacts into your XT system as you need (the XT1 Plus features 80 sensor slots, the XT2 up to 240 sensor slots). The door contact is battery powered and connects wirelessly to your XT alarm panel. Hence, you do not need to hassle with any wiring. Simply install the two elements of the door contact and connect them wirelessly with the alarm panel - it's as simple as that!

Fenstertürkontaktanzeige im WebUI
Always informed – the web interface of the XT2 Plus
Fast installation, easy automatization!

Once connected to your XT alarm panel, the door contact sends every status change to the alarm panel. This includes a notification in case of low battery, if the tampering protection at the back of the sensor is triggered, and when the window or door is opened or closed.

Thus, you can create various home automation rules that are triggered if you open a specific door or window. Do you want to automatically switch on the light when you enter your bath at night? Do you want to turn down the heating when you open a window? No problem – the intuitive web interface allows you to quickly create rules like these.

LUPUSEC XT2 Smarthome Alarmanlage
The LUPUSEC alarm system
Broad expandability - The LUPUSEC alarm system:
We offer a wide variety of sensors and accessories that you can control and program in your smart home alarm system. You can integrate door contacts, IP cameras, motion detectors, mechanical and magnetic locks, shutter relays, and heating controls with just a few easy clicks to your smart home alarm panel.

LUPUSEC - Door contact V2 (blanc)

Technical data:

Dimensions sensor 86.9 x 27.7 x 21.2mm (LxWxH)
3.42 x 1.09 x 0.83 inches (LxWxH)
Dimensions magnet 46 x 12.2 x 10.3 mm (LxWxH)
1.69 x 0.48 x 0.40 inches (LxWxH)
Weight Sensor: approx. 34 g (1.12 oz)
Magnet: approx. 10g (0.35 oz)
Detection method Magnetic measurement
Sensor type Reading contact
Tampering protection Yes
Tampering protection of the sensors displayed in the web interface Yes
Status display Yes
Status checked by the alarm panel Yes
Status displayed in the alarm panel Yes
Battery status displayed in the alarm panel Yes
Battery status checked in the alarm panel Automatically
Radio frequency 868,35MHz
Radio performance max. 10mW(10dBm)
Transmission range Approx. 30 to 100m (32 to 109 yards) depending on the local conditions
Modulation FM
Mounting options Screwing or gluing
Power supply 3V CR123 lithium battery
Average battery life 2.6 years (at approx. 20 uses a day)
Place of installation Window, door, etc.
Only indoors
Conforms to the following standards CE, FCC, RoHs, EN 50131 Grade 2
Compatible with XT alarm panel XT1, XT2, XT2 Plus, XT3, XT4


Door contact (2-parts) Battery
Screws and dowels Adhesive tape
Datenblatt - LUPUSEC Fenster- / Türkontakt V2 Weiß
247 KB
Datenblatt - LUPUSEC Fenster- / Türkontakt V2 Weiß
Konformitätserklärung - Fenster- / Türkontakt V2 (weiß)
41 KB
Konformitätserklärung - Fenster- / Türkontakt V2 (weiß)
Questions fréquemment posées
Sorry there are no FAQ's for this product.
Show all FAQ's
Il n'y a aucun commentaire pour ce produit.

We Also Recommend :

  • The Starter Kit contains : XT1 Plus Main Unit, XT1 Keypad, 2 Door-/Window Contact Sensors and 1 Motion Detector
  • Integrate up to 80 wireless alarm sensors into your system
  • Alert notification via SMS, email or TCP/IP / Contact ID
  • Supports 24h security service centers via Contact ID protocol
  • One interface for your home or on the go: Check the status of your home, control windows and doors or watch live images instantly! It is as easy as it is fast!
  • Full access via Smartphone, Tablet, PC or Mac
  • Fast installation!
  • Reports reliable all moving of objects
  • Wireless
  • Small dimensions
  • Tamper protection
  • Status transmission
  • In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID

Vous avez un besoin particulier ?

  • Recherches fréquentes
  • Revendeurs
  • Produits
  • Contact