Wireless Sensor Input:
This LUPUSEC-XT wireless sensor input has a potential-free contact. As soon as this contact is beeing closed (i.e. by wired door contact, photocell, BUS-System) an alert notification is submitted via email, SMS or via the worldwide emergency response center standard protocol CONTACT ID. It is also possible to connect several detectors to this sensor input. The XT-1 is capable to work with up to 20 sensors and the XT-2 with up to 160. All sensors are long life battery powered and wireless connected to the main unit. So there is absolutely NO need for any wiring!
We offer a total number of 17 different sensors. If you have any further questions do not hesitate to contact us!
Technical data: |
|
Dimensions | 22 x 32 x 107mm (0.8 x 1.2 x 4.2 inch) (LxWxH) |
Packaging dimensions | 30 x 20 x 115mm (1.1 x 0.7 x 4.6 inch) (LxWxH) |
Weight | 0.03 kg (0.06 pounds) |
Detection method | Potential-free contact |
Resistance | 30 Ohm |
Tampering protection | Yes |
Tampering protection displayed in the alarm panel | Yes |
Status checked by the alarm panel | - |
Status displayed in the alarm panel | Yes |
Radio frequency | 868,6625 MHz |
Radio performance | max. 10mW(10dBm) |
Transmission range | Approx. 30 to 100m (32 to 109 yards) depending on the local conditions |
Modulation | FM |
Mounting options | Screwing, glueing |
Power supply | 1 x 1/2 AA 3,6V lithium batteries |
Average battery life | 2.8 years |
Place of installation | any Only indoors |
Conforms to the following standards | CE, FCC, RoHs, EN 14604 |
Compatible with XT alarm panel | XT1, XT1 Plus, XT2, XT2 Plus, XT3, XT4 |
Includes: |
|
Sensor input | 1 x 1/2 AA 3,6V lithium batteries |
Screws and dowels | Manual |
|
|