24 Products
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Displays the alarm mode of the alarm panel(armed / home / disarm)
  • Battery powered and can be glued to the wall
  • Allows you to check the alarm mode of your XT with one glance
  • For indoor and outdoor usage
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Grants you an easy control over you shutters from any place in the world
  • You can set Smarthome rules that will open / close your shutters when you enter / leave your home, as well as, temperature, time, or light-controlled
  • Fits easily in conventional in-wall pattress boxes
  • You can connect your existing shutter controls and continue to use them
  • Suitable for shutters, jalousies, awning motors up to 230 watt
  • Smart, invisible installation
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Individual control over your electronic devices
  • Shows you the power consumption of the connected devices
  • Estimates the power consumption for a week / month / year
  • Works as a repeater for other ZigBee devices
  • More comfort, security, and cost control
  • Very small chassis
  • Max. 3680W 16A
  • Works only with: XT1, XT1 Plus, XT2, XT2 Plus, XT3
  • Extends the range of your sensors
  • Small and unobtrusive chassis
  • Easy to install
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • You can control the wireless relay via you alarm panel, program it time or temperature controlled, or when you arm or disarm your alarm panel
  • It can send its alarm status to BUS systems
  • Wireless transmission
  • Very small chassis
  • Max. 575W 2,5A 230V
  • Is suited to control heating-valves
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • You can control the wireless relay via your alarm panel, program it time or temperature controlled, or when you arm or disarm your alarm panel
  • Is able to transmit the alarm status to any KNX autoamtion system
  • The XT Software interface shows the current power consumption
  • Wireless transmission
  • Very small chassis
  • Max. 2300W 10A
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Allows you to trigger a single home automation rule or up to 5 home automation rules simultaneously in one scenario
  • No wiring necessary
  • Can be installed with glue or screws
  • Works only with: XT1, XT2
  • You can control the wireless relay via you alarm panel, programm it time or temperature controlled, or when you arm or disarm your alarm panel
  • It can send its alarm status to BUS systems
  • The power consumption is displayed in the alarm panel
  • Wireless transmission
  • Very small chassis
  • Max. 2300W 10A
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Replaces your existing light switch
  • Allows you to control your lights via your XT2 Plus smart home alarm panel
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Every ten minutes, the sensor transmits the temperature at its location to the alarm panel
  • Allows you to control your wireless relays and power supply devices based on the temperature
  • Battery life: approx. 1 year
  • Wireless
  • Easy to install
  • Uses 2.4GHz bandwidth -> Is not compatible with the wireless repeater
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Allows you to activate or deactivate potential free devices
  • Control your garage doors, pool covers, jalousies, and many more...
  • Toggle switch
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • The relay is controlled via the software, by time or temperature, or by system activation / deactivation
  • The relay is installed in your fuse box
  • It can send its alarm status to BUS systems
  • The power consumption is displayed in the alarm panel
  • Wireless transmission
  • Very small chassis
  • max. 3680W 16A
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • The relay is controlled via the software, by time or temperature, or by system activation / deactivation
  • The relay is installed in your fuse box
  • It can send its alarm status to BUS systems
  • The power consumption is displayed in the alarm panel
  • Wireless transmission
  • Very small chassis
  • max. 6900W 30A
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • New: improved version 2017
  • The radiator thermostat controls your room temperature
  • Allows you to automatically control your radiators according to a schedule
  • Can automatically turn off you heating when you are opening your windows
  • You can change between various profiles – even if you are already out of town
  • Easy installation
  • XT1: Shows you if your door is locked or unlocked
  • XT1 Plus, XT2, XT2 Plus, XT3: additionally allows you to arm and disarm your alarm panel with your door lock
  • Simple and secure method to arm / disarm your alarm panel
  • Easy to install
  • Can trigger smart home rules (e.g. switch standby devices on or off, switch your lights on or off)
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Every ten minutes, the sensor transmits the temperature at its location to the alarm panel
  • The display shows you the room temperature and the humidity
  • Various actions and smarthome rules can be controlled via the temperature
  • Allows you to control your wireless relays and power supply devices based on the temperature
  • Battery life: at least 1 year
  • Wireless
  • Easy to install
  • Works only with: XT1, XT1 Plus, XT2, XT2 Plus, XT3
  • The XT wireless relay is able to open or close a contact, thus, it allows you to control other devices. It can operate depeding on the status of your alarm panel, certain alarms, or be controlled via home automation rules
  • Wireless transmission
  • Very small chassis
  • Mains adapter included
  • Works only with: XT1
  • You can control the wireless power supply device (PSS) via your alarm panel
  • Displays the power consumption of connected devices
  • Wireless transmission
  • Very small chassis
  • max. 3600W 16A
  • Works only with: XT1, XT2
  • Every ten minutes, the sensor transmits the temperature at its location to the alarm panel
  • Battery life: approx. 1 year
  • Wireless
  • Easy to install
  • Allows you to control your wireless relays and power supply devices based on the temperature
  • Uses 2.4GHz bandwidth -> Is not compatible with the wireless repeater
  • Works only with: XT1 Plus, XT2 Plus, XT3
  • Measures the brightness at its location
  • Sends the brightness information to the alarm panel
  • Allows you to create brightness controlled home automation rules
  • Is suited for indoor and outdoor usage
    • Works only with: XT1 Plus, XT2 Plus, XT3
    • Measures the power consumption directly at your main electric meter
    • Is connected to the IR interfcae of your digital main electric meter
    • Estimates the power consumption for a week / month / year
    • Helps you to identify power guzzlers
    • Will show your the demand (W) and the counter reading of your digial meter
    • IR sensor is easily installed via a magnet
    • Helps you to make your home smarter and more efficient
    • Works only with: XT1, XT1 Plus, XT2, XT2 Plus, XT3
    • Securely and automatically locks your doors
    • Prevents you from entering the secured area without previously disarming your alarm panel
    • Very small chassis
    • Seperate base for a surface mounting included
    • Holding force: 600kg (1322 pounds)
    • Wireless
    • Works only with: XT1, XT1 Plus, XT2, XT2 Plus, XT3
    • Securely and automatically locks your doors
    • Prevents you from entering the secured area without previously disarming your alarm panel
    • Very small chassis
    • Seperate base for a surface mounting included
    • Holding force: 60kg (132 pounds)
    • Wireless
    • Works only with: XT1 Plus, XT2 Plus, XT3
    • Allows you to control devices via infrared
    • You can create home automation rules for you’re A/C, TV, or fans
    • Connect up to 5 devices and save up to 8 commands for each
    • 3D wall mount included
    24 Products

    LUPUS-Smarthome Alarm systems

    The free LUPUSEC App provides you with the option to access your LUPUSEC Smart home alarm system in its entirety by smartphone or tablet computer. Everything at one glance in a clearly arranged app. Do you want to check the alarm status while youre away? Or arm or disarm the alarm system? Or simply double-check that windows and doors are closed? No problem, one look at your smartphone is enough and you can enjoy the day. THE MOST IMPORTANT FUNCTIONS IN DETAIL: Arming, disarming, or partial arming Worldwide real-time access to any information and event Worldwide real-time access to any setting Live camera access to CCTV cameras and CCTV recorders integrated in the system View pictures of events Integrated home automation devices such as e.g. wireless sockets can be activated and deactivated. Please note that additional costs may arise if your LUPUSEC alarm system connects to the internet, depending on your mobile or internet service provider. Please note furthermore that your LUPUSEC-XT1 main panel must be connected to the internet and configured accordingly to control it externally.

    Become a specialist retailer

    Are you looking for something specific?

    • Frequent search terms
    • Specialist retailers
    • Products
    • Contact
    NOTE: We guarantee that your data will be handled confidentially and will not be shared with third parties. Find out more about data privacy here Privacy
    Cookies help us to provide our services. By using our services, you agree to the storage of cookies.