Back to overview
LUPUSEC - XT3 Main Panel
LUPUSEC - XT3 Main Panel
LUPUSEC - XT3 Main Panel
LUPUSEC - XT3 Main Panel
LUPUSEC - XT3 Main Panel
LUPUSEC - XT3 Main Panel
Item No.:12120

LUPUSEC - XT3 Main Panel

On request
Become DealerFind Installer

LUPUSEC-XT3. The new smart home alarm panel by LUPUS-Electronics.

Das Betriebssystem für Ihr Zuhause

The new LUPUSEC-XT3 is an innovative burglar alarm, smart home, and video surveillance system that is reliable, easy to use, and extremely versatile. You do not need any constructional alterations to protect your building against intruders or other risks. The alarm panel can control your heating, lights, shutters, and other electronic devices. Additionally, you can integrate your cameras, view their live stream, and, thus, immediately discover the source of an alarm.

Förderbar durch die KfW
LUPUSEC-XT3 is a professional and secure alarm system.

LUPUSEC-XT3 protects your building professionally. You can connect up to 160 alarm sensors via the proprietary radio band of 868MHz. Alarm sensors against burglars, robberies, fire, water, gas, and medical emergencies are available. In case of an alarm you will immediately by alarmed via push-notifications, e-mail, SMS, a telephone call, and additionally you can connect a 24/7 guard service. For the transmission of these alarms, the XT3 uses two redundant methods: Via your network and via the integrated GSM module

Of course, you can also integrate video surveillance systems by LUPUS, as well as, 99% of available IP cameras on the market into the user interface of your LUPUSEC-XT3.

Professional and secure! Hence, the LUPUSEC-XT3 is certified according to the European quality norm of EN50131 grade 2.

Die XT3 ist ein umfangreiches Smart Home System
The operating system for your building
LUPUSEC-XT3 is an extensive smart home system.

The LUPUSEC-XT3 is the perfect control unit for your building. You can control your heating, lights, shutters, and other electronics devices. Due to the simple and intelligent software, you can connect all functions with each other and, thus, you can adjust them to your individual routines and schedules: e.g. you can create power and temperature events that are triggered when you leave your home, or power and light events according to a fixed time or depending on the sunrise and sunset. Thus, it is quite simple to create a holistic presence simulation, as well as, power saving routines with just a few clicks. All of our smart home actors are connected wirelessly via ZigBee Plus with the alarm panel, thus, they are separated from the radio band of the alarm sensors.

LUPUSEC XT2 Smarthome Alarmanlage
The operating system for your building
LUPUSEC-XT3 is a secure system with the highest standard for your privacy.

No cloud, no server, no data leech! No data that is stored on the XT3 is ever send to any server. Thus, you data is secure and neither collected nor analysed. The connection of a smartphone, tablet, or computer is always a direct connection between this device and your alarm panel. For the connection with these devices, the XT3 uses a secure end-to-end 256-bit TLS encryption. Hence, you are completely independent from any servers. Even if your internet connection fails or is compromised, the XT3 features a second, redundant alarm routine via the GSM module.

The available control units (keypad, tag reader, remote control) use a rolling code encryption, which protects the XT3 against attacks. Additionally, the sensors, the alarm panel, and the wireless connections are protected against tampering.

In case of a blackout, the LUPUSEC XT3 is equipped with an emergency power supply via a lithium rechargeable battery for 16 hours.

Der LUPUSEC  24 Alarmservice
The LUPUSEC 24 alarm service
LUPUSEC-XT3 offers an innovative service.

The LUPUSEC alarm service can be subscribed directly in the browser interface of the LUPUSEC XT3 and connects your alarm panel with a professional guard service that is working 24/7. The LUPUSEC 24 guard service also reacts when you are not able to.

Two different options of the LUPUSEC 24 guard service are available: the standard option costs EUR 19,90/month with includes status monitoring, burglar protection, fire protection, robbery protection, interference monitoring, LUPUSEC action plan, emergency monitoring (gas, water, medical), report logging, automatical alarm verification via telephone (five numbers). The premium option costs EUR 39,90/month and includes all services of the standard option, as well as, tampering monitoring, monitoring of opening and closing times for businesses, and private emergency response personal in case of an alarm.

The LUPUSEC 24 guard service is only available in Germany - other guard services can be connected via Contact IF over IP.

Installation wizard and one-click integration of sensors.

LUPUSEC-XT3 is easy to install and to use.

The installation wizard and the quick guide allow you to easily set up your XT3 alarm panel. You will be guided step by step to all the initial processes.

Due to the one-click technology, the integration of sensors is very simple and allows you to connect new sensors at any time to your alarm panel: You just need to open the menu "Sensors" → "Add" and start the connection mode of the alarm panel. Every sensor features a well visible button on its front. Pressing this button is enough that the sensor is displayed in the menu of the alarm panel and can be added by clicking on "add."

LUPUSEC GRID — The 100% individual user interface.

The LUPUSEC GRID is your completely individual user interface. This innovative HTML5 interface requires no server connection and is loaded directly from the alarm panel into your browser. The GRID consists of apps that you can adjust perfectly to your needs. For example, on a tablet in your kitchen, you could display the alarm control, outdoor cameras, electronics household aids and the light. On the first floor, you might prefer the shutter control and your entertainment system to the alarm control. These functions can be set up with a few clicks and sorted into different profiles according to the place at which they should be displayed.

Die LUPUSEC Android und iPhone APP
Free of charge: iOS and Android APP.
Die LUPUSEC App — Control your home while on the road.

The concept of our app is to allow you to control your home while you are on the road. The app is available for iOS and android devices and can be downloaded in the corresponding store. You will need about 2 minutes to enter the login information. On the home screen of the app, all important information are displayed: a brief log file with the current events, the alarm status, the option to switch between arm, disarm and home mode, direct access to the sensor status, home automation, and cameras. The app, just like the browser interface, allows you to easily connect new sensors, to create new automation rules, to control your heating, etc. By clicking on a push-notification (e.g. in case of an alarm) the app is immediately opened.

Das LUPUS Produktuniversum

There are more than 60 accessories available for the LUPUSEC XT3. This includes 16 alarm sensors, 24 smart home products, 6 control units, 4 sirens, two service products, more than 25 camera models, and a wide selection of camera accessories.


Datenblatt - LUPUSEC XT3 Deutsch
1010 KB
Datenblatt - LUPUSEC XT3 Deutsch
XT3 Declaration of Conformity
291 KB
XT3 Declaration of Conformity
XT3 User manual (german)
13.08 MB
XT3 User manual (german) Version 1.8
Firmware - LUPUSEC XT3
7.47 MB
LUPUSEC - XT3 Firmware v0.0.2.19E (Multilanguage). Please always delete your browsers cache after installation.
Handbuch - LUPUSEC Android APP
963 KB
Benutzerhandbuch - LUPUSEC Android APP v.0.5
Software - Lupus IP Finder für Windows
1.91 MB
IP Kamera Installer zum Suchen, Einrichten und Updaten der Lupusnet HD Kameras, Rekorder + LUPUSEC Alarmzentralen Version 1.0.8
Software - Lupus IP Finder für Mac OS
141 KB
IP Kamera Installer zum Suchen und Einrichten der Lupusnet HD Kameras, Rekorder + LUPUSEC Alarmzentralen Version 1.2
Frequently Asked Questions

What do I have to do to get remote access to my Lupus device?

How can I access my router?

In order to gain access to your devices via the internet, you have to set up a port forwarding in your router. In case you do not know the IP address of your router, you can find in the following way:

Windows PCMAC
  • Start the command interface
    Type in "cmd" in the start menu (without quotation marks)
  • Type in “ipconfig”
  • Standardgateway is the IP address of your router
  • Open the system settings
  • Click on network
  • Select your current network connection (Ethernet or WLAN)
  • The tab TCP/IP lists the IP address of your router
  • How do I set up a port forwarding in my router?

    A1 Hybrid BoxAllnet RouterArcor RouterAsus Router
    Belkin RouterCISCO EPC3928D-Link RouterD-Link HorstBox
    Fritz!BoxFritz!Box (ab Firmware 8.63)Hitron RouterHitron Router (neuere Firmware)
    Horizon BoxLINKSYS RouterO2 BoxSpeedport (W 502V, W 722V)
    Speedport (W 912V)Speedport SmartTelekom Digitalisierungsbox
    (offizielles Anleitungsvideo)
    TP-Link Router
    unitymedia - Kabel BWUPC Connect BoxUPC RouterVodafone EasyBox
    Vodafone EasyBox 904ZyXEL Speedlink 6501
    *Currently, there are only German manual available

    How do I access my device?

    After you have created a port forwarding as described in the manuals above, you can access your device by typing in the following address in your web browser:

    The real command would look similar to the following:

    Which port do I need to forward in my router?

    In the following table, the internal ports of our devices are listed:

    DeviceInternal port
    XT1 / XT280
    XT2 Plus443 (SSL encrypted - recommended) or 80 (not encrypted)
    LE 9xx cameras80
    LE 20080 (older firmware versions 88)
    LE 201 / LE 203TCP 80, TCP 37777, TCP 1935, and UDP 37778 (see FAQ LUPUSTEC → General → "Required port forwarding for an access via internet")
    Recorder HDTV / NVR / HD-SDITCP 80 and TCP 37777 and UDP 37778 (see FAQ LUPUSTEC → General → "Required port forwarding for an access via internet")

    Change the standard password of any device you allows to be accessed from the internet!

    last updated - 04/05/2018

    Which App can I use?

    DeviceAndroidiOSWindows Phone
    XT1 / XT1 Plus / XT2 (Plus) / XT3LUPUSECLUPUSECAccess possible via webbrowser
    Network cameras (LE9xx)LUPUSECLUPUSNET HDIP CENTCOM / Ip Cam Soft Pro / Webcam PI
    Older IP recorder (LE 904 / 909)LUPUSNET HDLUPUSNET HD-
    Older analogue recorder (LE800 / + / D1)SoCatchSoCatchiWatch DVR

    Please note that we are not liable for any problems that might occur while using Apps that were note developed by us.

    last updated - 02/20/2018

    Portforwarding with IPv6 (DSLite)

    Why is it not possible to set up a remote access / port forwarding with a IPv6 or an DS-lite tunnel?

    It is not possible to access a router that uses an IPv6 address or a DS-lite tunnel as long as the infrastructure of a country is based upon IPv4.
    This is true for all devices of all companies (e.g. even a VPN tunnel cannot be created in such a network).

    An IPv4 is required for a remote access, because this internet protocol is currently, and since the creation of the internet, the standard for the communication in the internet. As soon as the providers have changed their whole infrastructure to IPv6, a remote access via IPv6 is also possible.

    Currently, IPv6 has a worldwide coverage approx. 15%. Hence, a router with an IPv6 address or DS-lite tunnel cannot be accessed from the internet, because nearly all devices (e.g. your smartphone) are still using IPv4.

    To create a remote access, your smartphone needs to be able to communicate with your router and the router forwards the incoming signals to the device you want to reach in your local area network (e.g. your alarm panel). However, if your router uses an IPv6 address or DS-lite tunnel, your smartphone cannot communicate with your router and, therefore, the router cannot forward the signals.

    IPv4 and IPv6 have both advantages and disadvantages.
    IPv4 is the standard for the communication in the internet that can handle, both, IPv4 and IPv6 signals. In short, its advantage is that it features a high compatibility. Its disadvantage is the available amount of IP addresses (there are only 4.3 billion addresses available).
    The advantage of IPv6 is the incredible amount of available IP addresses (approx. 340 undecillion – a figure with 39 numbers with enough available addresses for 600 trillion devices per mm² of the earth). The disadvantage of IPv6 is that this protocol is not downward compatible to IPv4. Thus, all devices need to use an IPv6 if you want to use this protocol. For this reason, providers are beginning to change the infrastructure of their grids.

    However, this also leads to problems when you want to remotely access a device. If your provider already supplied you with one of the cheaper IPv6 addresses (they are cheaper because of the sheer amount of addresses), but the infrastructure of the complete internet / telephone network is not yet adapted to IPv6, a remote access cannot be established. As soon as the infrastructure is adapted to IPv6, an IPv6 remote access will be no problem.
    To change the IP address of the XT to IPv6 would not solve this problem, since the communication is not possible between your smartphone and your router. Hence, the IP address of the XT is not relevant at this point.
    Furthermore, this change could lead to access problems for someone whose router does not support IPv6

    How can you solve this problem for the time being?

    You need to contact your internet provider and tell them that you need an IPv4 address that will allow you to set up a remote access. This is mostly called "dual stack" (not lite!) or bridge mode.

    last updated - 04/17/2018

    How do I integrate the live stream of my LE200 into my XT alarm panel?

    In order to integrate the live stream of you LE200 into the XT alarm panel, you need to install the latest firmware update of the camera and set the sub-stream compression to MJPEG

    Please use the following command to integrate the camera:

    last updated - 03/22/2017

    Is it possible to display the MJPEG stream of the HDTV recorder in the alarm panel?

    Yes, please use the following syntax:


    Example with a standardised IP address, username and passwort:


    Please note that this requires the latest firmware of the recorder and that your need to set the compression of the extra stream in the recorder to MJPEG.

    last updated - 01/17/2018

    How do I correctly set up a home automation rule?

    To set up a home automation rule, several steps are necessary:

    • Open the menu "Sensors" → "List" and press on "edit" next to the sensor that shall trigger the home automation rule.
      If you want to set up a rule that is not triggered by a sensor, please skip this step.
      In the row "Home automation execute command," you can now define e.g. "Apply rule 1."
      Additionally, you can set up rules that will only performed if e.g. a door contact is opened or closed.

    • Open the menu "Smarthome" → "Automation" and create a new rule by pressing on the "+" symbol.

    • You can now define a name for this automation. This will help you to identify the function of the automation later on.
      In the column "Condition," you can set up a condition which will trigger the home automation. To use the "Rule 1" which we defined in the sensor above, please select "Triggered sensor action" and "Sensor event 1."
      The "Schedule" allows you to define a time condition for this rule. If you select "always," this automation will always be performed when the condition is fulfilled.
      The "Action" is the automation you want to perform if your condition and schedule settings are fulfilled.


      In this example, every time our door contact triggers the sensor event 1, a wireless plug is switched on.
      If you want that more than one condition needs to be fulfilled to trigger an automation, you can add additional conditions by pressing on the "+" symbol in the condition column. The same can be done to trigger multiple actions.
      Click on the checkmark to create this rule.

    • Right now, this rule is not active – this is depicted by the red exclamation mark left to the number of the automation. This means that this rule is not part of the currently active profile.

    • To manage your profiles, use the pull down menu "Profiles"
      If have not already set up a profile, please click on the "+" symbol to create a new one.

    • Assign a name to your profile and add the rule we created above in the column "rules / groups."
      Click on the checkmark when you are done.

    • In the image below, you see a finished rule that is assigned to an active profile. Additionally, a green checkmark is displayed next to the rule to show that this rule is currently active.
    last updated - 04/04/2017

    I still receive push notifications of an alarm panel after I have deleted the profile in my app.

    In order to turn off the push notifications of your XT, you need to add the XT again to your LUPUSEC app. After you have reconnected the alarm panel to the app, go to the menu "Settings" → "Push" in your app and disable the push notifications for this smartphone. Afterwards, you can delete the profile of the alarm panel from your app.

    last updated - 04/05/2017

    How do I setup a simulation of presence?

    Automation: "Zufällige Auführung" Allgemein

    Um eine Anwesenheitssimulation zu erstellen bietet die XT Zentrale die Möglichkeit einer zufälligen Ausführung eines Automationsbefehls. Dabei haben Sie die Wahl, ob die Automation garantiert in dem ausgewählten Zeitraum ausgeführt werden soll, oder ob diese nicht garantiert Ausgeführt werden soll.

    Allgemein gilt für die Ausführung:

    • Sie definieren in der Automation einen Zeitrahmen währenddessen die zufällige Ausführung stattfinden kann.
    • In diesem Zeitrahmen wird die Wahrscheinlichkeit dann auf die einzelnen Minuten aufgeteilt. Das heißt, je länger der Zeitrahmen, desto geringer ist die Wahrscheinlichkeit der Ausführung pro Minute.
      Bei einem Zeitintervall von 10 Minuten, hätte jede Minute eine Wahrscheinlichkeit von 10% die Automation zufällig auszulösen.
    • Bei einer garantierten Ausführung ist in der letzten Minute des Zeitraums die Ausführung garantiert (sollte die Ausführung nicht schon stattgefunden haben).
    • Definieren Sie bitte immer einen Zeitraum! Ein undefinierter Zeitraum (z.B. "Immer") würde dazu führen, dass die Wahrscheinlichkeit der Ausführung für einen unbestimmten Zeitraum definiert wird und daher die Wahrscheinlichkeit der Ausführung pro Minute eshr gering ist.

    Beispiel für eine Anwesenheitssimulation

    Zufällige AusführungJeden Tag 22:00 bis 22:10Zone einschalten

    Innerhalb jeder der Minuten dieses Zeitraums besteht dann, innerhalb der jeweiligen Minute, eine Chance von 10%, dass die Aktion ausgeführt wird.



    Für eine komplette Anwesenheitssimulation über an einen oder mehreren Abenden könnten Sie eine Automation dieser Art anlegen:

    Zufällige AusführungJeden Tag 18:34 bis 23:23Zone einschalten für
    • Diese Automationen sorgen dafür, dass zwischen 18:34 und 23:23 unter Umständen ein Relais / eine Funksteckdose für eine von Ihnen definierte Zeit eingeschaltet wird.
      • Nachdem der von Ihnen definierten Zeit wird das Relais / die Funksteckdose automatisch wieder ausgeschaltet und könnte erneut in diesem Zeitintervall durch die Automation eingeschaltet werden.
    • Wenn Sie bei der "zufälligen Ausführung" noch das die Einstellung "garantierte Ausführung: an" wählen, wird die Regel spätestens in der letzten Minute des jeweiligen Intervalls ausgeführt. Dies erlaubt Ihnen sicherzustellen, dass ein Licht tatsächlich einmal an geht – bedeutet aber auch, dass eine solche Regel leichter als Simulation erkannt werden könnte.
    • Sie können die Bedingung auch mit "Modus - Arm" kombinieren, so dass die zufälligen Ausführungen nur stattfinden wenn die Zentrale im Arm Modus ist.
      Natürlich können Sie hier auch andere Abhängigkeiten definieren: z.B. nur unterhalb bestimmter Lux Werte.

    Bitte beachten Sie, dass dies nur Beispielwerte sind, welche natürlich nicht in dieser Form 1:1 übertragen werden sollten.

    last updated - 12/05/2017

    One sensor displays CTRL Error. What does this mean?

    This error occurs if the sensor does not respond while the alarm panel checks the status of the sensors.

    It can be fixed by repeating the signal via e.g. Item No. 12050 LUPUSEC - LUPUSEC - Remote controlled mains socket with power meter and ZigBee repeater.

    The signal is repeated automatically by the mains socket.

    last updated - 03/22/2017

    Outdoor and indoor siren do not sound an alarm

    Please check if the alarm for the external sirens is enables in the menu "Sensors" -> "Siren"

    last updated - 08/28/2017

    What to do if my app does not work anymore?

    If your app does not work anymore, please prepare the following questions in order to help us to solve your problem

    • Which device do you want to access (XT1, XT2, XT2 Plus, which recorder, which camera)?
    • How do you access the device?
      • Local IP or DDNS address?
      • WLAN or mobile data?
        • If you use WLAN, are you and the device you want to access connected to the same WLAN?
      • Do you use a VPN connection or something similar?
    • Which cameras are connected to your XT or recorder (manufacturer and model number)?
    • Please retrace the steps that lead to the malfunctioning of the app
    • Which error message is displayed?
    • Does this problem occur on all of your smartphones / tablets / computers or just on this individual one?
    • Which version of the app is installed?
      • When did you install the last update?
      • Did this problem also occur in the older version?
    last updated - 03/21/2017

    Why do I always need two attempts to arm my alarm panel?

    If you cannot arm the alarm panel on the first attempt (e.g. via remote control or keypad) and you hear to different signal tones, the alarm panel notifies you about a problem. This could be an open door contact, open tampering protection, or a low battery, etc..

    You can override this warning and force the arming of the alarm panel by enabling the arm mode again within 10 seconds.

    last updated - 03/21/2017

    Why does Safari not accept the SSL certificate?

    Damit das Zertifikat der XT korrekt von Ihrem Safari Browser akzeptiert wird, gehen Sie, nach der ersten Bestätigung des Zertifikats, bitte folgendermaßen vor:

    • Gehen Sie zu den gespeicherten Zertifikaten in Ihrem Schlüsselbund
    • Gehen Sie zu "Vertrauen"
    • Wählen Sie "Bei Verwendung dieses Zertifikats" → "Immer vertrauen" aus
    last updated - 01/30/2018

    Which sensor is compatible with my XT alarm panel?

    XT sensor compatibility

    ProductItem No.XT1XT2XT1 Plus
    XT2 Plus
    XT2 with Dongle

    Alarm sensors

    Door contact (white)12002++++
    PIR motion detector12003++++
    Smoke detector12004++++
    Water sensor12007++++
    Medical emergency controller12009++++
    Glass breaking sensor12011++++
    PIR network camera12012++--
    Panic button12015++++
    Heat detector12018++++
    CO detector12019++++
    Sensor input12020++++
    Dual way motion detector12034++++
    Door contact (brown)12037++++
    Door contact (anthracite)12038++++
    PIR network camera V212041--++
    Water sensor V212047--++
    PIR network camera V312073--++
    Glass breaking sensor V212103-+++
    Vibration sensor12105-+++
    360° motion detector12111++++
    Door contact V2 (white)12113++++
    Door contact V2 (brown)12114++++
    Door contact V2 (anthracite)12115++++
    PIR motion detector V212116++++
    Emergency button12123++++

    Smarthome / Home automation

    Wireless power supply device12010+---
    Temperature sensor12013++--
    Wireless relay12014++++
    Wireless repeater12016++++
    Temperature sensor with display12021-+--
    Wireless power supply device with power meter12022++--
    Relay with power meter12023++--
    Lockswitch contact12026++++
    Relay with dimmer V212030--++
    Shutter relay12031--++
    Magnetic lock12035++++
    Mechanical lock12036++++
    Light switch12046--++
    Temperature sensor V212048--++
    Temperature sensor with display V212049--++
    Remote controlled mains socket with power meter and Zigbee repeater12050--++
    Relay with power meter V212051--++
    12/24V relay12052--++
    Radiator valve thermostat12053--++
    Scenario switch12061--++
    Universal IR controller12062--++
    Top-Hot relay DIN212063--++
    Top-Hat relay DIN312064--++
    Light sensor12065--++
    Electric meter12071--++
    Light switch V212072--++
    Status display12101--++
    Scenario switch V212102--++
    Wireless power device for XT112104+---
    Wireless repeater V212122++++

    Control unit

    XT Keypad12001++++
    Remote control12008++++
    Tag reader12028++++
    Outdoor Keypad12070+/-(please note FAQ)+++
    Keypad V212106-+++
    Tag Reader V212107-+++
    Remote control V212108-+++
    Outdoor Keypad V212109-+++


    Indoor siren12005++++
    Mini indoor siren (eol)12032 (eol)-+--
    Small indoor siren12032--++
    Outdoor siren V212033+/-(please note FAQ)+++
    last updated - 04/24/2018

    Show all FAQ's
    There are currently no product reviews.

    We Also Recommend :

    • Works only with: XT1 Plus, XT2 Plus, XT3
    • You can control the wireless relay via your alarm panel, program it time or temperature controlled, or when you arm or disarm your alarm panel
    • Is able to transmit the alarm status to any KNX autoamtion system
    • The XT Software interface shows the current power consumption
    • Wireless transmission
    • Very small chassis
    • Max. 2300W 10A
    • Works only with: XT1 Plus, XT2, XT2 Plus, XT3
    • Weather-proof (IP66) keypad
    • RollingCode encrypted transmission
    • Integrated RFID tag reader
    • Four programmable buttons for home automations
    • Programmable alarm output to activate camera recordings, door buzzer, etc.
    • Tampering protection
    • Background lighting
    • Powered by battery and mains adapter
    • 1.3 megapixels – max. 1280x800 pixels
      720p (1280x720 Pixel) @ 25FPS
    • Night-vision rage: 30 meters
    • 2,8mm lens – angle of vision 92°
    • WLAN
    • Professional chassis with protection class IP67
    • Supports SD cards up to 128gb
    • Wall or ceiling installation possible – additional junction box available
    • Works only with: XT1 Plus, XT2 Plus, XT3
    • Grants you an easy control over you shutters from any place in the world
    • You can set Smarthome rules that will open / close your shutters when you enter / leave your home, as well as, temperature, time, or light-controlled
    • Fits easily in conventional in-wall pattress boxes
    • You can connect your existing shutter controls and continue to use them
    • Suitable for shutters, jalousies, awning motors up to 230 watt
    • Smart, invisible installation

    Are you looking for something specific?

    • Frequent search terms
    • Specialist retailers
    • Products
    • Contact
    NOTE: We guarantee that your data will be handled confidentially and will not be shared with third parties. Find out more about data privacy here Privacy
    Cookies help us to provide our services. By using our services, you agree to the storage of cookies.