| Übersicht |
- Faster Interface
- 64mb Cache
- 2000GB disc space
- High reliability
- Less heat development
- Less noise
|
- Focal lenght: 2.8-12mm
- Iris: Auto-Iris
- Shutter: 1.4
- aspherical: Yes
- IR compatibel: Yes
- Focus shift: No
|
- 100m (109 yards) video wire RG59
- Shielded
- High copper ratio
- Underdamped
- Material: PVC
- Weight: 6kg (13.2 pounds)
- Made in Germany
|
- 12V power adaptor for the most of our cameras
- 500mA
- Plug for the power socket
|
- 12V power adaptor for the most of our cameras
- 1500mA
- Plug for the power socket
|
- In-wall 12V DC 1000mA power adaptor
- Ideal in use with our outdoor housings
- Dimensions: 66 x 37 x 22 mm (BxHxL)
- Operating temperature: ~ - 25 ° ~+50 °C
|
Easy to use extension of your wireless antenna
increases signal quality up to 40%
5 m cable length
SMA-BNC connection
|
Aufkleber: "Videoüberwachung"
|
- Usable to transmitt a video signal over two wires
- 600 meters transmission range
- Integrated compensator reduces picture distortions
- No power supply neccesary
|
|
|
- Adaptor BNC-female to RCA female
- Usable to connect to capture cards, dvr's and camera outputs
|
- 1 x BNC-Plug auf 2 x BNC female jack, T-Type
- Usable to split video signals
|
- BNC connector for all of our RG59 video cables
- Very robust material incl. golden pin
- Incl. antikink
- Incl. step by step manual
- We strongly recommend to use our BNC crimping tool
|
- BNC crimping tool for our BNC connectors
- You need this tool to crimp the BNC connectors on the end of the RG59 wires
- We deliver a step by step manual along with this tool
|
- BNC-Connector
- Usable to connect two RG59-wires
- BNC-female to BNC-female jack
|
- BNC female jack to RCA male plug
- Usable to connect a BNC wire directly to the TV-RCA input
|
- Amplifies video signals
- Deskews video signals
- For cable lengths of up to 1.500m (1640 yards)
- Power on/off switch
- 220V power supply
- Amplification levels: low, middle, high
- Integrated fuse
- Adjustment modes HF, LF and GAIN
- Connectors: Video In/-Out, Grounding, 220V
|
- Adapter von Cinch-Female auf Cinch-Female
- Wird verwendet um zwei Cinch-Kabel zu verbinden
|
- Connecting cable including a DC power plug (Plug 5.5x2.1x17.5 mm)
- Fits to all our cameras (excluding cameras with radio connection)
- Ideal in combination with our video system cables and high performance CCTV power supply
- 2m (2.1 yards) length
- Video surveillance from a single supplies!
|
- Connecting cable including a DC power plug (female) (Jack 5.5x2.1x22.5 mm)
- Fits to all our cameras (excluding cameras with radio connection)
- Ideal in combination with our video system cables and high performance CCTV power supply
- 2m (2.1 yards) length
- Video surveillance from a single supplies!
|
- Aluminium pole
- Conical
- Height: 4m (4.3 yards)
- Diameter: 114/76mm (4.4/2.9 inch)
- Wall thickness: 2.5mm (0.09 inch)
- Planted section is coated
- Grounding screw M-8
- Door opening: 400 x 85mm (15.7 x 3.3 inch)
- Cable connection: 50 x 150 mm (1.9 x 5.9 inch)
- Weight: approx. 15kg (33 pounds)
|
- Plug-and-play video system cable (combi cable)
- video conductor incl. BNC-connector plus 2-core power conductor incl. DC power connectors
- click\"product details\" to choose your preferred length available from 10 up to 50 meters (10.9 to 54.6 yards)
|
- 100m (109 yards) system cable: video RG59 plus 2-core for power/control
- Real double shielded: 2 wires connected in the middle
- High copper ratio
- Underdamped
- Material: PVC
- Wires seperable
- Weight: ca. 10kg (approx. 22 pounds)
- Made in Germany
|
- 250m (273 yards) system cable: video RG59 plus 2-wires for power/control
- Real double shielded: 2 wires connected in the middle
- High copper ratio
- Underdamped
- Material: PVC
- Wires seperable
- Weight: ca. 25kg (approx. 55 pounds)
- Made in Germany
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Detects and alarms you about concentrations of the highly toxic carbon monoxide gas
- Sends an alarm to the XT alarm panel
- Status transmission
- Battery life: approx. 2 years
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Allows you to connect external devices
- Potential-free contact
- Battery life: approx. 2.8 years
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
>
|
- XT1: Shows you if your door is locked or unlocked
- XT2, XT2 Plus, XT3: additionally allows you to arm and disarm your alarm panel with your door lock
- Simple and secure method to arm / disarm your alarm panel
- Easy to install
- Can trigger smart home rules (e.g. switch standby devices on or off, switch your lights on or off)
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Detects fires via an intigrated heat sensor
- Sends an alarm if the temperatur rises quickly or exceeds 57°C (134.6F)
- Battery life: approx. 3 years
- Battery status is displayed in the alarm panel
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Wireless indoor siren with 104dB
- Battery life: approx. 2 years
- Battery status is displayed in the alarm panel
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Designed to be wearable like a wrist watch
- Speacially for geriatric care
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Will trigger an immediate alarm - independent of the current arming status
- Small chassis
- Easy to install
- Also usable as a medical emergency controller
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2
- Motion dectection via passive infrared sensor (PIR) with RAS
- When a movement is registered, the camera will take 3 images and send them to the alarm panel
- Images are stored in the alarm panel and can be attached to an automatic alarm-email
- Battery life: approx. 2 years
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2
- Every ten minutes, the sensor transmits the temperature at its location to the alarm panel
- Battery life: approx. 1 year
- Wireless
- Easy to install
- Allows you to control your wireless relays and power supply devices based on the temperature
- Uses 2.4GHz bandwidth -> Is not compatible with the wireless repeater
|
- Works only with: XT1, XT2
- You can control the wireless relay via you alarm panel, programm it time or temperature controlled, or when you arm or disarm your alarm panel
- It can send its alarm status to BUS systems
- The power consumption is displayed in the alarm panel
- Wireless transmission
- Very small chassis
- Max. 2300W 10A
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Alarms your dependably of any water spillage
- Protection against water damage
- Easy to install
- Water-proof sensor (Protection class IP56)
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Passiver PoE Adapter
- Für Kameras ohne PoE
- Bestehend aus 2 Teilen
|
Converter tool to control PTZ-Cameras with your PC
|
- Camera mount for a wall or ceiling installation
- Sturdy aluminium
- Height: 165mm (4.9 inch)
- ¼” – 20 UNC thread (outer diameter: approx. 6.35mm [0.25 inch]; inner diameter: approx. 5.2mm [0.2 inch]; gradient: 1,27mm [0.05 inch])
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Combines a PIR sensors with a microwave sensor
- An alarm is only triggered if both sensors detect a movement
- Range: 0 - 15m (0 - 16 yards)
- Detection angle: 110 degrees
- Tampering protection
- Long battery life
- Wall mounting possible, Corner mounting with ball-and-socket joint
- In case of an alarm, your alarm panel will notify you via SMS, (phone call), E-mail, or contact ID
|
- Works only with: XT1, XT2, XT2 Plus, XT3
- Securely and automatically locks your doors
- Prevents you from entering the secured area without previously disarming your alarm panel
- Very small chassis
- Seperate base for a surface mounting included
- Holding force: 60kg (132 pounds)
- Wireless
|
